Cleaning Area Rugs; Cleaning With Hose And Tool - Bissell Proheat 2X Revolution 1548 series User Manual

Cleaning Area Rugs

Important! Please check manufacturer's tag before cleaning area rugs for any
specialized cleaning instructions. Not for use on silk or delicate area rugs.
Regularly clean your high-traffic area rugs in
Express Clean mode to remove the forgotten dirt.
Select Express Test in a small
1 2
Clean Mode. inconspicuous area
first for colorfastness.

Cleaning with Hose and Tool

*Ensure the machine is upright while using the hose and tool.
(The rotating brush rolls under the foot will lift o the ground.)
1
Lift the accessory hose door on top
of foot on the front of the machine.
The door flips toward the machine to
open.
3
Attach the tool to the end of the hose.
(Tools may vary by model.)
Press the power button to turn
machine on.
NOTE: If using the Mini Deep Reach Tool, be sure the needles of the tool are
pressed down into the carpet so the spray gets into the carpet fi bers.
Important: Keep the
3
foot of the deep
cleaner perpendicular
to the rug's edge with
each cleaning pass to
prevent damage.
2
Insert the hose and snap into place.
Be sure the colored hose release clip is
facing out, away from machine.
4
Press the spray trigger button to spray
the soiled area, then slowly move tool
back and forth over the area.
Release the trigger to suck up the dirty
solution. Work in small sections until the
area is clean.
When finished cleaning, turn the machine
on to suction up warm clean water to
rinse the inside of the hose and tool.
Detach the hose and tool and close the
accessory hose door. Let the hose and
tool air dry before storing.
www.BISSELL.ca
11