Main Unit Site Selection; Installation Accessories, Standard And Special Tools - UTStarcom UTS-600FSU Instruction Manual

Main Unit Site Selection

Choose a suitable location for the FSU Main Unit.
the device to:
Install the FSU on a stable surface, such as a desk or wall.
AC Adapter cord in determining the Main Unit's location.
interference from the connected telephone, make sure the Main Unit is installed at least
1 meter away. To minimize the length of coaxial cable between the main unit and the
antenna, position the indoor main unit as close as possible to the outdoor antenna.
Note : Make sure that the FSU Main Unit is positioned so that the green
LEDs are visible to the subscriber. When reporting trouble, the
subscriber will be asked the status of the LEDs.

Installation Accessories, Standard and Special Tools

This section lists all the equipment needed for and FSU installation.
all of these items on hand before beginning.
• Direct sunlight
• Dampness or moisture
• Dust
• Magnetic fields
• Vibration
• Extremes of heat, cold or humidity.
Accessories:
• Coaxial cable
• Coaxial cable connector (2 pieces)
• Marker
• PVC tape
• Self-adhesive rubber tape
• Earth cable
• Solderless grounding terminal (optional)
• Bracket for cable
Make sure the site will not expose
Consider the length of the
To avoid possible
Be sure to have
14