Table of Contents
Advertisement
WARNING : DEPENDING ON LOCATION, IT MAY BE
Figure 2-5 : Earth Cable Connection
NECESSARY TO GROUND THE ANTENNA TO
PREVENT DAMAGE BY LIGHTNING. REFER TO
THE FIGURE BELOW FOR A DIAGRAM OF THE
EARTH CABLE CONNECTION.
Terminal Lug
6. Attach a terminal lug to the lower bracket screw and
tighten screw.
7. Plug insulated copper wire into the terminal lug and
use the terminal lug crimper to affix the copper wire
to the terminal lug.
8. Attach the other end of the copper wire to a copper
clad rod as shown in the figure above.
AWG 12
copper wire
insulated
6 inches above ground
ground line
5 ft. by .5 inch
copper clad rod
20
Advertisement
Table of Contents
