Receive A Call; Maintenance; Specifications - UTStarcom UTS-600FSU Instruction Manual

Receive a Call

!
Ringing tone will be heard from desktop telephone when it receive a call.
Conversation will be available when you pick up the handset.
Placing a call on hold
!
Place a call on hold by depressing "PAUSE" key when you want to temporarily
stop the conversation.
While the other party is placed on hold, they can not hear you.
They hear a hold melody during holding.
You can go back to the conversation by depressing "PAUSE" key again.
Using the Flash function
!
You can catch the another call during conversation by depressing "FLASH" key.

3. MAINTENANCE

Whip it with a dry soft cloth.
When the dirt is too much, use a diluted neutral detergent with a well wrung towel,
then wipe with a dry soft cloth.
Do not use benzene, thinner or alcohol.
It may cause color-change or deterioration of the paint or writing.

4. SPECIFICATIONS

Radio frequency band
Transmission power 10mW
Power source
External dimensions Approximately 197 (width) x 162 (depth) x 85.5 (height) mm
Mass
1,900MHz
DC 4V, 300mA
Approximately 650g
22