Lifestand LSC User Manual page 38

LSC
6.3.4 Stand-up mechanism problem
Should a problem arise regarding the stand-up mechanism i.e. if the chair is stuck in stand or
semi-stand position : it is equipped for this eventuality with a safety system located under the
rear bonnet to enable a return to the sitting position.
The procedure is as follows:
- remove the rear plastic bonnet.
- unplug the jack from the stand-up gas cylinder.
- plug the jack into the jack socket which forms one piece with the right-hand battery tray.
- the gas cylinder automatically initiates a slow descent into the sitting position.
- once the position is reached, unplug the jack and contact your distributor.
- if this procedure does not work, contact your specialised dealer.
38
User's Manual.