Lifestand LSC User Manual page 29

LSC
Distance measurement (Distance)
Select "Distance" in the menu. Move the joystick to the right to go to the menu for setting
distance measurement. Then select "Total distance", "Trip", "Distance display" or "Reset" by
moving the joystick up or down.
- Total distance (Total Distance): Shows the total distance traveled by the control system.
- Trip (Trip Distance): Shows the total distance trav-
eled since the last reset.
- Distance display (Display Distance): Selects Trip
or Total Distance in the display.
- Reset (Clear trip distance): Move the joystick to the
right to reset the Trip measurer.
- Exit (Exit): Move the joystick to the right to exit the
installation menu.
Brightness (Backlight)
Select "Backlight" in the menu. Move the joystick to right or left to set the desired brightness for
the display backlight. Ten fixed levels are available from 10-100%.
Background (Background)
Select "Background" in the menu. Move the joystick right or left to select "Blue", "White" or
"Auto".
- Blue (Blue): The display background is blue in all profiles.
- White (White): The display background is white in all profiles.
- Automatic (Auto): The display background is programmed in the various travel profiles.
E.g. blue background for slow profile for indoors travel and white background for rapid pro-
file for outdoors travel.
Diagnostics (Diagnostics)
For qualified technicians only.
29 29
User's Manual.