Lifestand LSC User Manual page 23

LSC
2.6 Locking/Unlocking the Wheelchair
The wheelchair can be locked to prevent unauthorized use.
Locking:
• Make sure the wheelchair is turned on. Press and hold the start up button for aprox. 1 sec.
until a short "beep", release the button.
• Push the joystich forward untill a short "beep", then push the joystick backwards until a
short "beep".
• Release the joystick, a longer "beep" indicates that the wheelchair is locked.
Unlocking:
• Turn on the wheelchair, the speedindicator will riple back and forwards.
• Push the joystich forward untill a short "beep", then push the joystick backwards until a
short "beep".
• Release the joystick, a longer "beep" indicates that the wheelchair is unlocked.
2.7 Joystick
The joystick is used to regulate the speed of the wheelchair forwards or backwards, to turn
and to brake.
The speed is regulated proportionally by moving the joystick forwards or backwards and the
speed is directly proportional to the movement of the joystick (small movement low speed -
large movement high speed).
The wheelchair is turned by moving the joystick to the left or right.
The wheelchair is braked by moving the joystick back to the neutral position or letting it go.
Joystick
23
User's Manual.