Lifestand LSC User Manual page 26

LSC
3.3 Display
The status of the control system is shown in the display. The control system is on when the
display is backlit.
Screen Symbols
The Drive screen for the R-net has common components, which will always appear, and
components which will only appear under certain conditions. Below is a view of a typical Drive
screen in Profile 1.
Battery Indicator
Current Profile
Clock
Speedometer
Profile name
Current profile
This displays the charge available in the battery and can be used to
alert the user of the status of the battery.
Steady
This indicates that all is well.
Flashing Slowly
The control system is functioning correctly, but you should charge
the battery as soon as possible.
Stepping Up
The wheelchair batteries are being charged. You will not be able to
drive the wheelchair until the charger is disconnected and you have
switched the control system off and on again.
This displays the current speed setting.
The speed setting is adjusted using the Speed Buttons.
The Profile Number describes wich Profile the control system is
currently operating in. The Profile Text is the name or description
of the Profile the control system is currently operating in.
Battery indicator
Max. Speed indicator
26
User's Manual.