Lifestand LSC User Manual page 27

LSC
In Focus
Speed Limit
Restart
Control system Temperature
Timer
E-Stop
When the control system contains more then one method of direct
control, such as a secondary Joystick Module or a Dual Attendant
Module, then the Module that has control of the wheelchair will
display the In Focus symbol.
If the speed of the wheelchair is being limited; for example, by a
raised seat, then this symbol will be displayed. If the wheelchair
is being inhiited from driving, then the symbol will flash.
When the control system requires a restart; for example, after a
module re-configuration, this symbol will be flashed.
This symbol is displayed when the control system has intentionally
reduced the power to the motors, in order to protect them against
heat damage.
This symbol is displayed when the control system has intentio-
nally reduced its own power, in order to protect itself against heat
damage.
This symbol is displayed when the control system is changing
between different states. An example would be entering into
Programming Mode. The symbol is animated so that you can see
the sand running through the hourglass.
If the control system is programmed for latched operation, then
it is normal for an Emergency Stop Switch to be connected into
the External Profile Switch Jack. If the Emergency Stop Switch is
operated or disconnected, this symbol will flash.
27 27
User's Manual.