Handling - Lifestand LSC User Manual

LSC

4. Handling

4.1 Disengage and engage the drive wheels.
The wheels of your wheelchair can be used
in electrically powered mode or they can be
switched into manual mode in order to enable
a third person to move the wheelchair without
using the motor.
The levers are located on each side at the rear
of the wheelchair.
Disengage: Swing both levers outwards. The
wheels are disengaged, the wheelchair can be
pushed manually.
Engage: Swing both levers inwards. The wheels
are connected to the propulsion engines con-
trolled by the Joystick.
4.2 Driving your chair
The direction of the chair depends on the direc-
tion given to the joystick.
Push forward: The wheelchair drives straight
forward.
Push to the right: The wheelchair drives to the
right.
Push left: The wheelchair drives to the left.
Push backwards: The wheelchair will drive
straight backwards.
m
WARNING
The electromagnetic brakes are only effective on slopes of less than 10 %.
4.3 Braking
The system automatically returns to the neutral position when you let go of the joystick. The
motor brake operates and stops the chair immediately. In the parking position, the wheels are
automatically locked by the electromagnetic brakes.
For an emergency stop, reverse the direction of the joystick control beyond the NEUTRAL
position.
31
User's Manual.