Matrox Axio LE Installation And User Manual page 77

Choose Sequence > Sequence Settings
1
Settings
button.
2 Click the General
Scrubbing Mode
3 Under
whether you want to display frames or only one field when you scrub a
sequence in the
first or second field to eliminate the flickering that can be seen in your
picture when you pause while scrubbing interlaced video. Scrubbing fields
can also be used to check for any dropped fields that may have occurred in
your video during a telecine process.
¦ Note
The scrubbing mode will be set to
sequence that has a progressive video format.
Video Luma Level
4 Under
applied to luminance levels in your video when rendering and previewing
video in a sequence:
Broadcast
$
levels for broadcast video. Any super black or super white luminance
levels (that is, levels that fall below the standard black level or exceed the
standard white level) are clipped.
Post Production
$
or super white luminance levels in your video are retained.
5 Under Video Processing Format
the bit depth you want to use for processing video in a sequence. In some
tab.
Frame 1st Field
, select ,
Timeline
panel. For example, you may want to scrub the
, select the type of processing that you want to be
Processes video using the standard legal range of luminance
Processes video for post production. Any super black
, select either
and click the Playback
2nd Field
, or to indicate
if you're working with a
Frame
8-bit or 10-bit to indicate
Defining your sequence settings
55