Table of Contents
Advertisement
158
Changing the time code display
A value in a time code field can be displayed as a time code or a specific number
of frames. The first time you run A/V Tools, the fields display time codes. To
toggle between the two formats, press
(flashing vertical bar) is in any time code field.
For example, when working with NTSC clips, you could change a value of 24:04
(24 seconds, 4 frames) to 724 frames by pressing
back to time codes again by pressing
The time code format of your tape is indicated by the separator between the
seconds and frames digits in the time code fields as follows:
• A colon (
• A semicolon (
Defining your A/V Tools options
Before capturing or playing back clips with A/V Tools, you need to specify
various options, such as your editing video format and your capture and playback
settings.
°
To define your options for A/V Tools:
Click the
1
¦ Note
starts.
2
Under
captured clips. For more information, see
page 160.
Chapter 9, Using Matrox A/V Tools
:
) indicates non-drop frame.
;
) indicates drop frame.
Options
button.
Options
The
dialog box automatically pops up every time A/V Tools
Capture Folder
, specify the folder where you want to store your
while the insertion point
CTRL+SHIFT
CTRL+SHIFT
.
CTRL+SHIFT
"Selecting your capture folder"
, and then switch
on
Advertisement
Table of Contents
