Operation With Android Phone - Skyrc NC2600 Instruction Manual

OPERATION WITH ANDROID PHONE

Touch "Details" icon to show voltage graphic and battery internal resistance.
OPERATION WITH ANDROID PHONE
NC2600 comes with Bluetooth 4.0. When the Bluetooth in device is ON, it will connect to the charger
automatically when the APP starts.
1. Connect the power adapter DC connector to the charger and then plug the power adapter into
outlet (100-240V AC, 50/60Hz).
2. Insert AA or AAA battery
When a new battery is inserted and detected, the
battery sign and "CHARGE" in correspond slot will
blinking. Please wait five seconds, the charger will
proceed to the default mode which is charging.
3. Select the Bluetooth menu from your Android Phone or
other Android devices and ensure the Bluetooth is turned on.
4. Start your NC2600 APP, that you have downloaded
from the Google Play store. Your charger will connect to your
device automatically.
5. The Bluetooth indicator, located on the right side of charger remains steadily on. The charger name
display in Bluetooth list is "BLE Charger".
11
Touch system
setting icon
discharge cut-off voltage and negative delta V.

Touch "Details" icon to show voltage graphic and battery internal resistance.
Inserting AA or AAA Batteries
NC2600
OPERATION WITH ANDROID PHONE



to change value of temperature protection, voltage protection,
NC2600
Factory default
setting
12