Operation With Iphone - Skyrc NC2600 Instruction Manual

OPERATION WITH iPHONE

When the program for a slot is completed


,


exception of DISCHARGE mode top off charge


.


,


will be applied For CHARGE mode the total


&
,
- ,

For REFRESH ANALYZE BREAK IN DISCHARGE



.

capacity will be displayed
OPERATION WITH iPHONE
NC2600 comes with Bluetooth 4.0. When the Bluetooth in device is ON, it will connect to the charger
automatically when the APP starts.
1. Connect the power adapter DC connector to the charger and then plug the power adapter into
outlet (100-240V AC, 50/60Hz).
Insert AA or AAA battery
2.
When a new battery is inserted and detected, the
battery sign and "CHARGE" in correspond slot will
blinking. Please wait five seconds, the charger will
proceed to the default mode which is charging.
3. Select the Bluetooth menu from your iPhone or iPad
and ensure the Bluetooth is turned on.
4. Start your NC2600 APP, that you have downloaded
from the APP Store. Your charger will connect to your
device automatically.
5. The Bluetooth indicator, located on the right side of charger remains steadily on. The charger name
display in Bluetooth list is "BLE Charger".
Useful Notes And Tips
You can only connect your NC2600 charger with one device at a time.
09
,

.



DONE will displayed With the
DisCharge Rate




( )

and trickle charge continuous
Capacity





.

charged capacity will be displayed
DISCHARGE

,



mode the total discharge
REFRESHIST.
BREAK-INO.
REST CYCLE
Inserting AA or AAA Batteries
NC2600
Operation with Your iPhone
Touch slot number button(1-4) to change operation mode and current.
Volt Time
mAh
Touch system
setting icon
discharge cut-off voltage and negative delta V.

NC2600
OPERATION WITH iPHONE



to change value of temperature protection, voltage protection,
Factory default
setting
10