SMC Networks SMC8014WN Administrator's Manual page 53

Adding Predefined Services
Using the following procedure, you can select well-known services and specify the LAN host
IP address(es) that will provide the service to the Internet.
1. In the Port Forwarding menu, click the Add button below the Predefined Service Table.
The Predefined Service menu appears (see Figure 30).
2. Complete the fields in the Predefined Service menu (see Table 13).
3. Click Apply. (Or click Back to return to the Port Forwarding menu or Cancel to cancel any
selections you made.) If you clicked Apply, the predefined service is added to the
Predefined Service Table on the Port Forwarding menu.
4. To configure additional predefined services (up to 100, including customer-defined
services), repeat steps 1 through 3.
5. To change the settings for a predefined service, click the radio button to the left of the
service in the Predefined Service Table and click the Edit button. When the Predefined
Service menu appears, edit the settings as necessary (see Table 13) and click Apply.
6. To delete a predefined service, click the radio button to the left of the service in the
Customer Defined Service Table and click the Delete button. No precautionary message
appears before you delete a predefined service.
SMC8014WN and SMC8014WN2 Wireless Cable Modem Gateway Administrator Manual
錯誤! 尚未定義樣式。
Figure 30. Predefined Service Menu
53