Mounting; Orientation; Procedure - Chauvet Vesuvio II User Manual

Hide thumbs Also See for Vesuvio II:
Table of Contents

Advertisement

Mounting

Before mounting the product, read and follow the safety recommendations indicated in the Safety Notes.
For our CHAUVET Professional line of mounting clamps, go to http://trusst.com/products/.

Orientation

Always mount this product in a safe position, making sure there is adequate room for ventilation,
configuration, and maintenance. Always mount this product in a safe position and make sure there is
adequate room for ventilation, configuration, and maintenance. The Vesuvio II should be suspended
upright or upside down using the 2 Omega brackets included, or it can be placed on its rubber feet on a flat
level surface.
Chauvet recommends using the following general guidelines when mounting this product:
When selecting an installation location, consider easy access to this product for operation,
programming adjustments, and routine maintenance.
Make sure to mount this product away from any flammable material as indicated in the Safety
Notes.
Never mount in places where rain, high humidity, extreme temperature changes, or restricted
ventilation may affect the product.
If hanging this product, make sure that the mounting location can support the product's weight. See
the Technical Specifications for the weight-bearing requirements of this product.
When hanging this product, always secure to a fastening device using a safety cable. For our
CHAUVET Professional line of safety cables, go to http://trusst.com/products/.
When mounting the product on the floor, make sure that the product and cables are away from
people and vehicles.
When mounting the product overhead, always use a safety cable. Mount the product securely to a
rigging point, whether an elevated platform or a truss.
When rigging the product onto a truss, use a mounting clamp of appropriate weight capacity.

Procedure

The Vesuvio II includes 8 rubber feet for floor or horizontal mounting. You must supply the mounting
clamps. Make sure the clamps are capable of supporting the weight of this product. Use at least one
mounting point per product. For the CHAUVET Professional line of mounting clamps, go to
www.trusst.com/products.
Page 9 of 19
S
ETUP
http://
Vesuvio II User Manual Rev. 2

Advertisement

Table of Contents
loading

Table of Contents