Memory Card; Notes On Handling And Storage Of Sd Card - NEC ShieldPRO N22A User Manual

2.10 MEMORY CARD

A triple memory slot is equipped with the N22A supporting the following cards:
 SD Memory Card (Secured (with copyright protection))
 Memory Stick
 Multimedia Card
 SDHC Card (Class 6 data transfer speed at 6 MB/sec.)
These cards can be used for file storage, data exchange with a device equipped with a card slot
(including digital video and digital still cameras), music data writing and substitution for
password entry.
 For details on using "SD Memory Card", "Memory Stick", and "SDHC Card", refer to the
instructions of the manuals included with each card.
 Do not use "SD Memory Card", "Memory Stick", and "SDHC Card" in locations with static
electricity or electrical noise interference.
 It is recommended to use the dedicated device to format the card.
SD cards is applicable to contents delivery services such as Internet (applicable to secure (with
copyright protection feature)).
Always install a mini SD card on an exclusive mini SD card adapter. Insert or remove the adapter
to/from the mating slot. Do not leave the adapter on the slot.
 Memory Stick Duo and Memory Stick Pro are supported.
 When using a Memory Stick, make sure to attach it to the dedicated adapter, and insert and
remove it together with the adapter.
 "MagicGate" (copyright protection function) of Memory Stick is not supported.
 Do not insert xD Picture Card as N22A does not support this card. To use xD Picture Card, a
separately sold adapter or USB reader/writer supporting xD Picture Card is required.
 The SD card slot on N22A has the data transfer rate of 25MB/sec.
If an SD card for higher data transfer rate is used, the rate is limited to 25MB/sec.
*1 The data transfer rate is only the theoretical value to be different from the effective rate.

2.10.1 Notes on Handling and Storage of SD Card

(1) Do not take the following actions for SD card:

Disassemble or alter SD cards.

Give hard shocks to, bend, drop, and put water on SD cards.

Make hands or metals contact with metallic terminals on SD cards.

Peel off labels on SD cards or put new labels or seals on SD cards.
(2) Do not place SD card in the following places:

Place of increase in temperature (including closed in-car area and location exposed to
direct sunshine)

Place of high temperature and/or much dust

Place of generation of corrosive gas
*1
*1
69