Table of Contents
Advertisement
4.
If the following dialog box appears, select [カスタム再セットアップモード] and
press Enter.
The following dialog box appears.
5.
Select one of the following three procedures.
(1) [C ドライブのみを再セットアップ]
(2) [全領域を 1 パーティションにして再セットアップ]
(3) [ユーザ設定による再セットアップ]
(1) Re-setup of drive C only (NTFS)
If the HDD to be subject to re-setup has an unassigned area larger than drive C, re-setup
of drive C only may be disabled.
If so, retain the unassigned area as a partition before selecting [C ドライブのみを再セッ
トアップ].
If the following dialog box appears, select [C ドライブのみを再セットアップ]
1.
and press Enter.
If message "C ドライブに Windows XP を再セットアップします。よろしいです
2.
か？" appears on the dialog box, select [Yes] and press Enter.
For the subsequent steps, follow the directions on the dialog box.
If the [Windows XP Setup Wizard] dialog box appears after restarting, then the following
operation is the same as that for the standard re-setup.
Perform the operation according to the description in "Repairing System by Using
Recovery CD-ROMs".
149
Advertisement
Table of Contents
Troubleshooting
