Table of Contents
Advertisement
6. PARAMETER SETTINGS
6.4.3
Setting bus parameters
Set the bus parameters on the screen below.
Set the items as follows:
1) Baudrate
Select one of the following baud rate settings:
•
125 Kbit/s (125 kbaud)
•
250 Kbit/s (250 kbaud)
•
500 Kbit/s (500 kbaud)
2) MAC ID Master
Set the DN91 station number as a value from 0 to 63.
3) Heartbeat Timeout
Set the interval for checking any existence of slave stations.
4) Auto clear mode on
Set to turn OFF, or not, output to all stations in case an error occurs with any
single station.
−
6
5
MELSEC-A
Advertisement
Table of Contents
Troubleshooting
