Preparation Before Use; Requests; Notes On Usage; Setting Method For Electric Energy - Mitsubishi Electric NF400-SEW Instruction Manual

2.4 Preparation before use

The LCD display is covered with a scratch-proof protective sheet.
Remove it before operating.
When removing the sheet, the LCD display may light up due to static electricity,
but this is not abnormal.
After natural electrostatic discharge, the illumination will turn off soon.
In addition, display may flicker due to the internal processing for the refresh of display.

2.5 Requests

● The free warranty period and warranty scope for this product are as follows.
● Free warranty period
The free warranty period lasts for one year from the time of purchase.
● Warranty scope
(1) Any failures that occur during the warranty period will be repaired free of charge, assuming that the usage status, usage method, usage
environment, etc. are as described in the product ' s catalog, User ' s Manual, warning labels, etc., and that the product was used under standard
conditions as described in the precautions, etc.
However, the free warranty period shall last a maximum of 18 months after manufacture, with a maximum of six months for the distribution
period after the product is shipped from Mitsubishi Electric.
(2) A fee will be charged for repairs under the following circumstances, even if the product is still within the free warranty period.
• Failures resulting from inappropriate storage/handling, carelessness, error, etc. on the customer ' s part.
• Failures resulting from installation mistakes.
• Failures resulting from misuse or unreasonable modification.
• Failures resulting from fires, abnormal voltage, or other external events beyond human control, or from earthquakes, wind disasters, or other
natural disasters.
• Failures resulting from phenomena that could not be foreseen using the scientific technology standards at the time the product was shipped
by Mitsubishi Electric.
The free warranty described here applies only to the delivered product, and does not apply to any damage or the like caused by failures in the
delivered product.
● This free warranty does not apply to any damage or the like caused due to reprinting or reproducing the information included in this document
in whole or in part in any form without the consent of Mitsubishi Electric.
● All efforts have been made to keep the information in this document current as software and hardware is revised. However, there may be cases
where inconsistencies arise.

2.6 Notes on usage

(1) The products described in this Instrunction Manual were designed and manufactured as general-purpose items meant for general industrial use, etc.
Please contact Mitsubishi Electric sales to discuss use for special purposes including atomic energy, electric power, aerospace, medical, or
passenger transport devices or systems.
(2) Mitsubishi Electric shall not be held responsible for damage caused for reasons not attributable to Mitsubishi Electric; opportunities or profit lost by
customers caused by Mitsubishi Electric product failure; damage caused from extraordinary circumstances, secondary damage, accident
compensation, damage to anything other than Mitsubishi Electric products, or compensation for any other work, whether foreseen or not by
Mitsubishi Electric.
Remove the
protective sheet
before use.
6
MDU