Parts Needed To Complete The Kit, But Not Included; List Of Parts You Will Need To Complete The Model - X Models Blade XL Operating Manual

X-MODELS - Blade XL & SUPER BLADE
Decal
If you like, you may stick the decal we supply
with the kit (see figure

1.3 Parts needed to complete the kit, but not included

These are the parts you will need to complete the model
plete the model") and some you may need as option.

List of parts you will need to complete the model

To complete the model you will need the following (purchasing separately):
COD. QT.
SERW 4 wing servo
SERV 2 tailplane servo
RXC6 1 receiver (+ xtal)
INTE 1 ON/OFF switch
BATT 1 rx battery pack
UNIM 4 cable with a RX (UNI) plug
Note: not included in the table are glues and small parts that should obviously be present in every modeler's house.
4
2).
Fig.2: Decal "Blade XL".
Item
(see "List of parts you will need to com-
Remarks
HI-TECH HS-125MG
HI-TECH HS-322HD or HI-TECH HS-475HB
max. dimensions: 65 x 40 x 22 mm
max. dimensions: 35 x 25 x 25 mm
NiCd o NiMH, 4 cells, SC size, from 1700 mAh
length: 30 cm