CHAP. 2 BUILDING INSTRUCTIONS
In order to achieve a correct assembling of the model, we suggest to follow carefully the instructions.
2.1 Preliminary operations
Kit components control
Have a look at the components
in order to easily identify them.
It is strongly suggested to trial fit all the parts "dry" before gluing them.
2.2 Fuselage
Inside the fuselage, the following components will be arranged:
— balancing weights;
— battery pack;
— V-tail pushrods;
— V-tail servos and ON/OFF switch;
— electrical connections for the wing servos;
— RX receiver.
Balancing weights
• Using some double adhesive tape, fasten
about 80 ~ 100 g of weights in the position
shown in
figure
6; the weights have to form
a layer with no more than 10 mm of thick-
ness
(see figure
7).
Fig.6: Balancing weights position.
The layer will be used as a base for the battery
pack
(see figure
7); the rest of the weights will
be added afterwards (during the model balanc-
ing) directly into the nose.
Fig.7: Max. thickness of the balancing weights.
(see "PARTS LIST, MATERIALS AND TOOLS LIST" at page 3)
Nuova FULCRO Service
max 150 mm
max 10 mm
7
Need help?
Do you have a question about the Blade XL and is the answer not in the manual?