Tools And Materials Needed (Not Included) To Complete The Kit; Tools; Materials - X Models Blade XL Operating Manual

X-MODELS - Blade XL & SUPER BLADE

1.4 Tools and materials needed (not included) to complete the kit

Tools

These tools may help you while assembling the kit:
— electric drill (and various size drill bits);
— modelling knife (or scapel);
— solder + soldering iron;
— hair drier (at least 1000W);
— set of files;
— usual tools like screwdrivers, pliers, etc.;
— vernier callipers (precision 1/20 of mm);
— sandpaper P400;
— Z-Bend pliers.
Note: other tools may help you too...

Materials

To complete the model, You need the following materials:
— super-glue (CA, cyano, like Green ZAP);
— "5 minute" epoxy;
— hot glue;
— approx. 200 grams lead;
— heat shrink sleeve (diameters: 3 mm e 6 mm);
— double adhesive tape, thin;
— velcro.
Note: other materials such as paints, brushes, pencils, etc. are not mentioned.
WARNING! PAY ATTENTION TO THE SAFETY INSTRUCTIONS FOR THE USE OF ANY KIND OF GLUE OR
TOOLS.
If you should need we may supply all you need to complete your model:
Nuova Fulcro Service S.r.l.
Via Castelleone, 9 - Costa S. Abramo - 26022 Castelverde - CR (ITALY).
Tel.: 0039 0372 35138 - Fax: 0039 0372 27121
e-mail: info@fulcroservice.it
www.xmodels.it
6