Table of Contents
Advertisement
On the General tab, the Zone Status shows the device information.
7.4. Configure HeartBeat Interval
In a security system, it is important that Zone devices report the conditions to the central security unit (the
CIE device). To meet this need, Netvox came up with a technique called "HeartBeat". By default settings,
Z308 reports HeartBeat every hour. Users can configure the period of time by the following steps:
Wake up Z308 first (please refer to
5.5. Wake up
Z308).
Right click on the End Point of Z308 and select Properties.
On the Advance tab, set up the HeartBeat period (30 seconds~168 hours) and click Set HeartBeat to
complete the setting.
15
Advertisement
Table of Contents
