Page 1
2-Port Gigabit PoE+ Extender - 802.3at and 802.3af - 100 m (330 ft) POEEXT2GAT *actual product may vary from photos FR: Guide de l’utilisateur - fr.startech.com DE: Bedienungsanleitung - de.startech.com ES: Guía del usuario - es.startech.com NL: Gebruiksaanwijzing - nl.startech.com PT: Guia do usuário - pt.startech.com...
Page 2
StarTech.com. Where they occur these references are for illustrative purposes only and do not represent an endorsement of a product or service by StarTech.com, or an endorsement of the product(s) to which this manual applies by the third-party company in question. Regardless of any direct acknowledgement elsewhere in the body of this document, StarTech.com hereby...
Table of Contents Product diagram ..................1 Front view ..............................1 Rear view ..............................1 Introduction ....................2 Packaging contents ..........................2 System requirements ..........................2 About the extender ................4 About power output ..........................4 About the ports ............................4 Install the extender ................5 Install a single extender ..........................
• To ensure optimal performance and extension distance, it’s highly recommended that you use solid Cat5 or better ethernet cable, rather than using stranded cable. System requirements are subject to change. For the latest requirements, please visit www.startech.com/POEEXT2GAT. Instruction manual...
Page 6
Behavior Status Solid A port link is established green Blinking IN (Input) There is network activity on the port green Solid The port has input 52-56V PoE power yellow Solid A port link is established green Blinking OUT 1 (Output 1) There is network activity on the port green Solid...
About the extender The extender supports 10Mbps, 100Mbps and 1000Mbps (Gigabit) network speeds and will automatically detect the speed of the incoming connection. The extender should be installed between the PSE (Power Source Equipment) and the PD (Powered Device). It is powered by the PSE and forwards the Ethernet data and remaining PoE power to the PDs.
Install the extender The extender can be integrated into your PoE network infrastructure as a single unit, or you can use multiple units in a daisy-chain configuration. Install a single extender 1. Use RJ45 cable to connect your Power Sourcing Equipment (PSE) device to the extender’s IN port.
Limitation of Liability In no event shall the liability of StarTech.com Ltd. and StarTech.com USA LLP (or their officers, directors, employees or agents) for any damages (whether direct or indirect, special, punitive, incidental, consequential, or otherwise), loss of profits, loss of business, or any pecuniary loss, arising out of or related to the use of the product exceed the actual price paid for the product.
Page 10
StarTech.com is an ISO 9001 Registered manufacturer of connectivity and technology parts. StarTech.com was founded in 1985 and has operations in the United States, Canada, the United Kingdom and Taiwan servicing a worldwide market.
Need help?
Do you have a question about the POEEXT2GAT and is the answer not in the manual?
Questions and answers