Z-150.6 Sp Speaker Wiring - zapco Z-150.2 SP Owner's Manual

Please read the spacial note about Channel 5 at pag. 1. The printing on the end plate is correct for
+ and - . While gold is normally the + terminal, some amps have left the factory with the colors
reversed. However, the printing on the end plate is correct. Please note the correct - and +
terminals in the speaker charts.
The Z-150.6 is a 6-channel amp that can drive six speakers from 6, 4, or 2 channels
of input. Note that channels 5 and 6 are arranged top and bottom and Ch5 has +
and - reversed from the other channels.
That said:
• If you are driving full range speakers the only control you will really need is
on Channels 1 ~ 4 are the HPF filter to use as a sub sonic. Channels 5 and 6
are designed for bass or mid-bass and plays from 15Hz to 1000Hz
Ch. 2
Ch. 1
Ch. 3
Ch. 4

Z-150.6 SP Speaker Wiring

6Ch 6 speakers
Ch. 5
Ch. 6
17