Advertisement
Table of Contents
- 1 Table of Contents
- 2 The Symbilink™ Z250C4-SL
- 3 Z250C4-SL Key Features
- 4 Front Panel Layout - Input Section
- 5 Front Panel Layout - Output Section
- 6 Specifications
- 7 Power Per Channel Vs. Distortion, Four Channels Driven
- 8 Installation
- 9 The Z250C4-SL also Works with the Symbilink™ Line Driver
- 10 The Z250C4-SL Supplies Power to Signal Processors such as the SP7-SL
- 11 Why Use the Balanced Symbilink™ System
- 12 Symbilink™ Cable and Connector Pinout
- 13 Technical Assistance
- Download this manual
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for zapco Z250C4-SL SymbiLink
Summary of Contents for zapco Z250C4-SL SymbiLink
- Page 1 Model Z250C4-SL Competition Four Channel Amplifier A.R.P.A. OF AMERICA CORP. MADE IN MODESTO, CA U.S.A.
-
Page 2: Table Of Contents
Table of Contents The SymbiLink™ Z250C4-SL Z250C4-SL Key Features Front Panel Layout - Input Section Front Panel Layout - Output Section Specifications Power Per Channel vs. Distortion, Four Channels Driven Installation The Z250C4-SL Also Works With The SymbiLink™ Line Driver The Z250C4-SL Supplies Power To Signal Processors, Such As The SP7-SL Why Use The Balanced SymbiLink™... -
Page 3: The Symbilink™ Z250C4-Sl
The SymbiLink™ Z250C4-SL Thank you for purchasing the Z250C4-SL. The Z250C4-SL is a four channel amplifier that is conservatively rated at 30 watts x 4 into four ohms, 60 watts x 4 into two ohms and 100 watts x 4 into one ohm loads. The Z250C4-SL features SymbiLink™... -
Page 4: Z250C4-Sl Key Features
Z250C4-SL Key Features • • Balanced SymbiLink™ Quality ZAPCO® construction Technology • • Dual pro audio balanced Computer-linearized bias for differential inputs class A performance • • Low radiated noise for clean Separate LED’s for Power and AM/FM reception Protection •... -
Page 5: Front Panel Layout - Input Section
Front Panel Layout... -
Page 7: Specifications
Specifications Power per Channel - 4 channel mode T.H.D. +N <.02% 30 watts x 4 @ 4Ω <.04% 60 watts x 4 @ 2Ω <.3% 100 watts x 4 @ 1Ω Power - Dual bridged mono <.04% 120 watts x 2 @ 4Ω <.3% 200 watts x 2 @2Ω... -
Page 8: Installation
To ensure proper operation and maximum performance of your amplifier, ZAPCO® recommends that the installation is performed by a ZAPCO® authorized dealer. If this service is unavailable to you, or you wish to do your own installation, the... -
Page 9: The Z250C4-Sl Also Works With The Symbilink™ Line Driver
The Z250C4-SL also works with the SymbiLink™ Line Driver... -
Page 10: The Z250C4-Sl Supplies Power To Signal Processors Such As The Sp7-Sl
The Z250C4-SL supplies power to signal processors such as the SP7-SL... -
Page 11: Why Use The Balanced Symbilink™ System
Why use the Balanced SymbiLink™ System? RCA style unbalanced cables have the following disadvantages: 1) Magnetic & electrostatic pickup. Noise and audio distortion can be induced into the cable because the cable shield is also the audio (-) connection. 2) Unbalanced cables are typically driven into very high impedance’s, causing transient ringing. -
Page 12: Symbilink™ Cable And Connector Pinout
SymbiLink™ Cable and Connector Pinout... -
Page 13: Technical Assistance
Technical Assistance Should you experience a problem with your Z250C4-SL, please contact the dealer that sold you this product. If your dealer is unable to solve your problem, you may contact the factory service department directly. Phone: (209) 577-4268 mon-fri 8am-5pm pacific time Fax: (209) 577-8548 If you need to return this product for repair, please include your name, return shipping address, daytime phone number, and a detailed... - Page 14 A.R.P.A. of America Corp. 413 S. Riverside Drive, Suite D Modesto, CA 95354 (209) 577-4268 Fax (209) 577-8548 Z250C4-SL Rev. C 11/95...
Need help?
Do you have a question about the Z250C4-SL SymbiLink and is the answer not in the manual?
Questions and answers