Z-150.4 Ap Speaker Wiring - zapco Z-150.2 AP Owner's Manual

The Z-150.4 AP four channel amplifier is virtually two 2Ch amps in one chassis and each set
of four speaker terminal can be used exactly as you would use a 2Ch amp. The advantage of
a four channel amp is primarily the saving of space (and a little money). Using a four channel
also reduces the installation work, over installing two 2Ch amps.
• This is the standard hookup for full range front and rear speakers
• Speakers can be 2Ω ~ 4Ω
2Ω ~ 4Ω
2Ω ~ 4Ω
Want more power? Instead of four channels of 150 watts, you can have two channels of
500 watts each by bridging both front and rear amp sections to one speaker each.
• Speakers must be a minimum of 4Ω impedance
16

Z-150.4 AP Speaker Wiring

Standard 4Ch Mode
2Ch Bridged