Speaker Wiring Of The Studio-X Dsp Amplifiers - zapco ST-X DSP Owner's Manual

Speaker Wiring of the ST-X DSP Amplifiers
• No speaker wires can be shorted to, or touching either ground or each other.
This will put the amp into protect and may damage the amplifier
• When bridging the left and right channels of any ST-X DSP amplifier, you
use the left channel (Ch1) positive and the right channel (Ch2) negative, as
indicated on the chassis by the speaker terminals
NOTE: If you bridge channels be surer to make all adjustments identical between bridged
channels
The Very Basics
12