Furuno VR-3000 Instruction Manual page 9

3. Select a desired channel number by pressing Next or Previous button. Selectable
channel numbers in the menu are VHF1, VHF2, MIC1/MIC2, MIC3/MIC4, and
MIC5/MIC6. Buttons in the channel menu work as below.
Back:
Monitor:
First:
Previous:
Next:
Last:
Edit:
Goto:
4. Press Edit button to set up the page. It is not necessary to fill in all lines. However,
label the input line clearly for ease of identification, using "Channel id," "Source"
and/or "Source type" lines.
Active: When the channel is used, check this box.
Channel id: Enter a name to identify the sensor. (No.1 VHF for example)
Source: Enter "Model name." (FM-8700 for example)
Source type: Numeric field
Note: Enter "Manufacture." (Furuno for example)
Goes back to the previous menu.
Used for audio recording test.
Goes to the first channel number.
Goes back to the previous channel number.
Goes to the next channel number.
Goes to the last channel number.
Used when editing the page.
Goes to the page of the specific channel number. Enter the desired
channel number in the box left to Goto button and press the Goto button.
Audio Channel -Edit
Active:
Channel#:
Channel id:
Sample rate:
Source:
Sample data size: 8-bit Fixed
MIC1 Active:
MIC2 Active:
Source type:
Note:
Fig.3.6 Audio Channel Edit menu
Submit Back
x
MIC1/MIC2
15625 Hz Fixed
x
x
5