Audio (Audio Channel) - Furuno VR-3000 Instruction Manual

12. Select a sub menu by pressing a desired button in Main menu.
13. In the sub (card) menu;
1. First, press "Channels" button.
2. Press "Next" button to select the channel for editing.
3. Press "Edit" button.
4. Edit as required. (Select "Submit" to save the change.)
Note: When Junction Box (IF-8530) is connected, checked the "Remote Junction Box
selected" check box. And confirm the "Eth 2 IP addr : 172.31.24.1" and "Eth 2 IP mask :
255.255.0.0". Serial channel (SI08-SI15), Analog channel and Digital channel
configuration become effective because it checks the "Remote Junction Box selected"
check box.

3.1 Audio (Audio Channel)

To configure audio channel;
1. Select "Audio Channels" in
main menu. The Audio
Card menu appears,
showing the status of Audio
I/F card in the Data
Processing Unit.
Fig.3.4 Audio card menu
2. Press Channels button to
show Audio Channel menu.
Fig.3.5 Audio channel menu
Audio Card
Active:
Name:
Node id:
Number of channels:
Audio codec:
Audio Channel
Back
First Previous Next Last Edit 0-4 Audio ch Goto
Active:
Channel#:
Channel id:
Sample rate:
Source:
Sample data size:
Source type:
Note:
4
Back
Edit
X
AD LINK 9111DG
1
5
Dynamic Range 64 codec
Channels
Monitor
x
VHF1
15625 Hz
LEFT SIDE BRIDGE VHF
8-bit Fixed