Furuno VR-3000 Instruction Manual page 18

Frame Grabber Setup Flow Chart
Select VIDEO>Channels>Edit and set parameters as
below. Settings in parenthesis are reference only.
These parameters are set according to video signal.
Horizontal offset:
Vertical offset:
Horizontal sync polarity: (Positive)
Vertical sync polarity : (Positive)
Phase:
Horizontal resolution:
Vertical resolution:
Pixel rate:
PLL
Save image to web: Saved as JPEG
Sample rate:
Sync type:
From next page
Start
0
0
0
(1280)
(1024)
(according to resolution)
(according to resolution)
15 seconds
(Separate SYNC)
Press Calibrate button.
Change following parameters
one at a time .
1) First, Vertical offset
2) Next, Horizontal offset
3) Then, PLL multiplier
Press Test button.
Fig. 3.10 (1/2)
14