Ice Maker And Storage Bin - Kenmore 106.5942 series Use & Care Manual

Table of Contents

Advertisement

Available languages

Available languages

3.
4.
Take the new cartridge
out of its packaging
and remove
the
covers
from
O-rings.
A. Cover
B. O-ring
Place the cap (removed in Step 2) on the new filter. Align the
ridge on the cap with the arrow on the filter. Turn the cap
clockwise until it snaps into place.
3.
4.
With the cap in a horizontal
position, insert the cap into the
base grille until it stops.
Turn the cap counterclockwise
until the cap slips into the
attachment
slot. Then, turn the cap clockwise until it is in a
horizontal
position.
NOTE: The cap will not be even with the base grille.
A. Eject
button
B. Arrow
on filter
C. Ridge
on cap
5.
Push the new filter
into the opening
in the base grille.
As the
filter
is inserted,
the eject button
will depress.
The eject
button
will pop back out when the filter
is fully
engaged.
6.
Pull gently
on the cap to check
that the filter
is securely
in
place.
7.
Flush the water
system.
See "Water
and Ice Dispensers."
Using the Dispenser Without
the Water
Filter Cartridge
You can run the dispenser
without
a water
filter
cartridge.
Your
water
will not be filtered.
1.
Remove
the filter
by pressing
the eject button
and pulling
on
the cap.
See "Changing
the Water
Filter"
earlier
in this
section.
2.
Remove
the cap
by turning
it counterclockwise
until it stops.
IMPORTANT:
Do not discard
the cap.
It is part
of your
refrigerator.
Keep the cap
to use with
the replacement
filter.
ce
N_ :s e__'c_d
S'i_e_fage B_
Allow
24 hours to produce
the first
batch
of ice. Discard
the
first three
batches
of ice produced.
The quality of your ice will be only as good as the quality of
the water supplied to your ice maker. Avoid connecting the
ice maker to a softened water supply. Water softener
chemicals (such as salt) can damage
parts of the ice maker
and lead to poor quality ice. If a softened water supply
cannot be avoided, make sure the water softener is
operating
properly and is well maintained.
Do not use anything
sharp to break up the ice in the storage
bin. This can cause damage to the ice container and the
dispenser mechanism.
Do not store anything on top of or in the ice maker or
storage bin.
Style 1
Turning the Ice Maker On/Off.
The On/Off
switch is located on the top right-hand
side of the
freezer compartment.
To turn on the ice maker, slide the control to the ON (left)
position.
To manually turn off the ice maker, slide the control to the
OFF (right) position.
NOTE: Your ice maker has an automatic
shutoff. The ice maker
sensors will automatically
stop ice production,
but the control
will remain in the ON (left) position.
16

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

106.5943 series106.5110 series

Table of Contents