Advertisement
Figure 5
Connecting The PMI/PMI-INTL To The CC-5
OPERATION
ELECTRICAL RATINGS
Installation Instruction A24205-A334-B844 (English) or A24205-A334-A844 (German).
Siemens Building Technologies, Inc.
8 Fernwood Road
Florham Park, New Jersey 07932
In the normal standby condition the PMI displays the site specific custom message,
the time and date, and a synopsis of the system status.
When an event occurs in the system, the display enters the Alert mode. The event is
displayed, the local audible sounds and the appropriate LED blinks. If the event
caused notification appliances to sound the Audibles On indicator lights. At the
bottom of the screen an acknowledge button is displayed. Pressing this button
acknowledges the event and silences the local audible. Once all events are acknowl-
edged a reset button becomes available in the lower right side of the display. If
notification appliances were active, two additional buttons appear at the bottom of
the screen. These allow the operator to silence or unsilence the notification appli-
ances. When the notification appliances are silenced the Audibles Silenced LED
lights. The system can only be reset with the notification appliances silenced.
If more events are present in the system than can be displayed on a single screen a
scroll bar appears to the right of the event list. Pressing the up and down navigation
buttons to the right of the LCD allows the operator to move through the list. The
selected event is highlighted in the display. Pressing the More Info button will display
a screen showing details relating to the selected event. Other buttons also appear at
the bottom of this screen. There is an expanded text message available and a selec-
tion to show all of the devices associated with the event that are active. The operator
can return to the previous screen by pressing the ESC (-) button, which is adjacent to
the More Info button. (For more detail on PMI operation, refer to the FireFinder-XLS
Manual, P/N 315-033744.)
2
4
V
B
a
k c
P
a l
n
e
C
r u
e r
t n
S
c
e r
w
T
r e
m
n i
l a
2
4
V
C
r u
e r
6
2 .
V
B
a
k c
P
a l
n
e
C
r u
e r
t n
2
4
V
S
a t
n
d
y b
C
r u
e r
t n
For CE applications in Cerberus E100 systems refer to
Siemens Building Technologies, Ltd.
2 Kenview Boulevard
Brampton, Ontario L6T 5E4 CN
Figure 6
Connecting The PMI-REM/PMI-INTL To The RNI
2
3
0
m
A
t n
0
0
2
3
0
m
A
Siemens Gebäudesicherheit
GmbH & Co. oHG
D-80930 München
P/N 315-033070-4
Advertisement
