Installing The Monitor; Installing The Base - Prestigio P198 User Manual

19" TFT COLOR MONITOR

1. Installing the Monitor

Unpacking
Open the shipping cartons and check the contents.
If any items are missing or damaged, contact your dealer immediately.
The package should include the following items:
• TFT color monitor
• User's guide
• Power cord
• Signal cable
• DC power adapter
• Audio cable

Installing the Base

Follow these steps to install the base:
1. Turn the monitor down.
2. Assembly the base to the arm with screw.
3. Tie the screw with a coin.
Installing the Monitor
This monitor is equipped with an auto sensing DC power adapter for voltage ranges 100-240VAC, 60/50Hz. Confirm the
line voltage designation on the rear panel of the monitor. Follow these steps to install the monitor:
1. Before you connect the cables, made sure that the monitor and the system unit power switches are off.
2. Plug one end of the 15pin-signal cable to the monitor and the other end to the video signal connector at the rear of
the system. Tighten the two screws on the cable connector.
3. Connect the DC power cord to the DC jack.
4. Connect the power cable.
PRESTIGIO P198 5