Tektronix PHASER 840 Quick Reference Manual page 45

Table 4 Front panel and fault history log error codes and messages
Error code
22,901,0C DOOR
EVENT
22,902, 0C DOOR
EVENT
22,LSS,TC: Media jams
L indicates the location
of the jam
1 Bottom Hi-capacity
Paper Feeder
2 Middle Hi-capacity
Paper Feeder
3 Top standard tray
4 Handfeed
5 Front cover
6 Top cover
7 Y-axis jams (see
following error
codes)
9 Door opened jams
(see following error
codes)
T indicates whether a
timeout or an event
occurred
0 = event
1 - timeout
C indicates checksum
31,000 Motor Faults
31,001.4x
MP_FAULT_AUX_MOTO
R_ERROR
31,002.4x
MP_FAULT_PROCESS_
MOTOR_STALL
31,003.4x
MP_FAULT_PREHEAT_
EXIT_SENSOR_BAD
Meaning
The front access door is opened
The top, stripper, access door is opened
SS indicates sensor location:
00 Usually because of an opened door
01 Bottom High-Capacity tray sensors
02 Bottom High-Capacity pick sensors
03 Middle High-Capacity tray sensors
04 Middle High-Capacity pick sensors
05 Standard tray sensors
06 Standard tray pick sensors
07 Handfeed sensors
08 Preheat entry sensor
09 Width sensors
10 Width A sensor
11 Width A4 sensor
12 Preheat exit sensor
13 Stripper exit sensor
14 Media Exit sensor
15 <undefined>
16 VE_DM CYCLE_DONE out of order
17 VE_TF_ROLLER_LIFTED out of order
18 Unknown reason
Not used as a device fault condition.
Not used as a device fault condition.
Declared at boot time when a check is made to determine
the condition of the preheat exit sensor. Declared when
the sensors around the preheat exit sensor indicate the
presence or absence of media contrary to that indicated
by the preheat exit sensor.
Service Guide
35