5055 SIP Phone User Guide (Rev. A)
Creating/Modifying a SIP Account
You can modify the SIP account information of the SIP Phone using the Web Configuration
Tool.
1. Access the Web Configuration Tool.
2. Click SIP Configuration.
3. Enter/change the SIP Account information as needed (see Table 13 on page 54 for more
information on these settings).
4. Click the Save and Reboot button. A confirmation screen is displayed.
5. Click the OK button. The SIP Phone is updated and reboots.
6. For each user profile, enter/change the associated SIP Authentication user name and
password (see Modifying a User Profile on page 35 for more information).
Modifying the Network Configuration
Viewing the IP and MAC Addresses
To view the Internet Protocol (IP) address and the Media Access Control (MAC) address of
the SIP Phone:
1. Press the Menu key.
2. Press the Line 1 key. The IP and MAC addresses are displayed.
3. Press the Menu key to return to the default display.
Modifying Network Configurations
You can modify the following network configuration settings of the SIP Phone using the Web
Configuration Tool or the SIP Phone Menu Interface (see Table 10 on page 53 for more
information on these settings).
• Basic Settings:
−
SIP Phone host and domain names.
−
DHCP status.
−
Address type.
−
SIP Phone IP address and subnet mask (supplied automatically by ISP/LAN if DHCP
is on).
−
Default gateway (supplied automatically by ISP/LAN if DHCP is on).
−
Primary and secondary DNS addresses (supplied automatically by ISP/LAN if DHCP
is on).
• Additional Servers Settings:
−
TFTP server.
−
SNTP server and time zone of SIP Phone.
- 36 -