Table of Contents
Advertisement
Main Menu
Table 3 SIP Phone Menu Interface Settings (continued)
Main Menu
PHONE
SETTINGS?
(con't)
Menu Key Commands
There are a few other settings you can access using the SIP Phone's Menu key.
Menu + Line Key Commands
1. These commands give you access to information about your SIP Phone. To access
them, press the Menu key, then press the appropriate Line key. Press the Menu key to
return to the default display.
Table 4 Menu+Line Key Commands
Display
Top Line
Bottom
Line
Menu + Keypad Commands
These commands perform actions on the SIP Phone. To access them, press the Menu key,
then each of the keypad keys in succession.
Sub-Menu
4.DEVICE PARAMETERS?
Software Version
MAC Address
Sub-Menu
5.PROTCOL CONFIG?
HTTP
TFTP
TELNET
6.MULTI USER CONFIG?
7. NETWORK SETTINGS?
DHCP
Phone IP Address
Phone Subnet Mask
Default Gateway
SIP Server Address, Port
Default SIP Server, Port
SIP Proxy Port Num
Voice Mail Server, Port
Primary/Secondary DNS
Servers
TFTP, SNTP Servers
PHY Aneg
Menu + Line 1
SIP Phone IP address
SIP Phone MAC
address
- 43 -
Appendix A—SIP Phone Interface
Notes
To view the software version and MAC
address of the SIP Phone.
Notes
Turns protocols required for web-based
software upgrade and control of the phone on
of off.
Turns the MultiUser profiles On or Off. User
profiles work best with stand-alone installations
(not directly connected to a 3050 ICP). Turn
this feature on, only if your SIP phone is stand-
alone, and you need this feature.
To change Network settings (see Table 10 on
page 53 for more information on these
settings).
Enables/disables Ethernet autonegotiation
Menu + Line 2
Main software
version
Boot software
version
Menu + Line 3
Display name
User name
Advertisement
Table of Contents
