Table of Contents
Advertisement
5055 SIP Phone User Guide (Rev. A)
# CONFIGURE THE PHONE BY THE TFTP SERVER
# (Network Configuration, Advanced, TFTP Configuration)
# choice [0-no, 1- yes, 2-always]
# if the option "always" is chosen, every time the phone boots up, it downloads
#
the configuration parameters from the TFTP server which overwrites any static
#
values of these parameters. This mode is useful for administrators to control the
#
phone's settings. User can't select this option from the web interface.
# If the option "Yes" is chosen, the phone will boot up and download the configuration
#
file from the TFTP server. Therefore, the statically configured parameters, if any,
#
are overwritten by the parameters in the configuration file. After boot up, user can
#
change this parameter to "No" from web interface.
# If the option "No" is chosen, the phone, when booting up, does
#
not download the configuration file from the TFTP server. The phone may only
#
do a version check for the main image.
tftp_config= 1
# ADDRESS TYPE
# (Network Configuration, Basic, Address Type)
# choice[0-IPv4 or 2-FQDN],
# when the option IPv4 is chosen, the outgoing SIP requests uses the dotted
#
format of the IP address
# when FQDN is chosen, the outgoing SIP requests uses the "sip:host_name.domain" format
#
for the "contact" SIP header. The FQDN address must be a resolvable entry in the DNS
#
server.
addr_type= 0
# DOMAIN NAME
# (Network Configuration, Basic, Domain Name)
domain= -example.com
# TFTP SERVER IP ADDRESS
# (Network Configuration, Additional Servers, TFTP server)
# the SIP phone downloads the boot image, the main image, and the configuration
# parameters from this IP address
tftp= 192.168.0.1
# SNTP SERVER IP ADDRESS
# (Network Configuration, Additional Servers, SNTP server)
# the SIP phone updates its date and time from this server
sntp= 192.52.103.103
# TIME ZONE
# (Network Configuration, Additional Servers, Time Zone)
# integer [-12, 0, 12]
time_zone= -5;
EST time
#time_zone= 8;
China
# TOS
# (Network Configuration, Advanced, Tos Value)
# integer [0, 7];
tos= 0
# IEEE 802.1 PRIORITY
# (Network Configuration, Advanced, 802.1 Priority)
# integer [-1, 0, 7]
# -1 means OFF
802_priority= -1
# VLAN ID
# (Network Configuration, Advanced, VLAN ID)
# integer[0, 4095]
vlan_id= 1
##################################################################################
# SIP configuration
##################################################################################
# LOCAL SIP PORT
# (SIP Configuration, Basic, Phone Listening Port)
# SIP phone listens for the SIP packets at this port
# when the other phone calls this phone, the SIP packets must be sent to this port
local_sip_port= 5060
- 74 -
Advertisement
Table of Contents
