Mitel 5055 User Manual page 66

5055 SIP Phone User Guide (Rev. A)
Table 13 Web Configuration Tool: SIP Configuration Settings
Setting Name
Basic
SIP Proxy Server
Port
SIP Registry Server
Port
Authenticate Method
Registry Duration
Phone Listening Port
Transport Protocol
Symmetric UDP Port
Additional Servers
Outbound Server
Outbound Server IP
address
Voice Mail Server
Number of rings
Port
Backup Server Timeout
Emergency
Emergency Number
Emergency Server IP
Port
Firewall
Values (bold = default)
<IP address> | <domain
name>
<number>
<IP address> | <domain
name>
<number>
None | Basic | Digest
<duration in seconds>
<number>
UDP | TCP
On | Off
<IP address>
<IP address> | <domain
name>
4
<number>
4
<number>
<IP address>
<number>
- 60 -
Notes
Appended to dialed name or number (for
example, name@proxy). Limit of 128
characters. Default is blank.
The SIP Proxy Server port number. Default
is 5060.
Used if SIP Proxy and Registry Servers are
not the same. Limit of 128 characters.
Default is blank.
The SIP Registry Server port number.
Default is 5060.
None: no registration authentication.
Basic: authentication without encryption.
Digest: authentication with encryption.
Time after which you are automatically
deregistered. Default value is 7200 seconds
(2 hours).
Receive port used by the SIP Phone for SIP
signaling. Default is 5060.
Default type of packets for transmitted SIP
signaling. UDP = User Datagram Protocol.
TCP = Transmission Control Protocol.
If on, all SIP request and responses are
sent to the outbound server. Default is
192.168.0.1.
Server address of external voice mail
server. Default is blank.
Port number of Voice Mail Server. Default
value is 5060.
Some ISPs offer backup servers that can be
used when the primary server is
unavailable. This field lets you configure
how long the 5055 SIP phone will wait
before it tries the backup server.
Emergency number for area, if applicable
(for example, most of North America uses
911 as an emergency number). Default is
blank.
Address of server used by emergency
number dialed. Default is 0.0.0.0.
Port number of Emergency Server. Default
is 5060.