Cut And Place Vinyl Like A Pro - USCutter SC2 User Manual & Assembly Instructions

A good VINYL CUTTER
is just the start...
You also need the right
media, blade, and
application tape to
ensure a professional job.
MEDIA
CARRIER
30°
MEDIA
CARRIER
GET EVERYTHING FOR YOUR
The "workhorse blade" good
Best for thin materials
for most vinyl materials.
such as heat press vinyl.
VINYL CUTTING NEEDS
60
MEDIA
CARRIER
45°
60
MEDIA MEDIA
MEDIA
CARRIER
CARRIER
CARRIER
MEDIA
For use on thicker materials
CARRIER
and for highly detailed cuts.
Use sparingly to preserve
sharpness.
MEDIA
MEDIA
CARRIER
CARRIER
425.481.3555
Oracal 8300, 8500,
8510, & 8800
Oracal 3951 & 3651
HP Gloss & Matte
Oracal 631 or
GreenStar Wall Vinyl
EasyWeed
(standard fabrics)
EasyWeed Extra
(nylons/water resistant)
Oracal 651 or GreenStar
Intermediate (calendered)
for short term
Oracal 751 or 951 (cast)
for long term
Oramask
Paintmask Stencils
Your blade depth should be set so
60°
that the tip of the blade protrudes
about the distance of the width of
a credit card from the opening of
60
the blade holder. Test for the proper
MEDIA
depth setting by holding the blade
CARRIER
holder and manually trying to cut
through two sheets of paper. You
should only be able to cut
through the top sheet.
MEDIA
29
www.uscutter.com
Cut & Place Vinyl Like A Pro
45°
Main Tape
Blade
GXF-775 or
Glass Application
R-Tape AT65
Main Tape 45°
GFX-341 Blade
Main Tape
45°
GXP750 or Blade
Oratape HT55
30° Blade
(general)
60° Blade
(glitter/flock)
45° Blade
GreenStar
(general)
Layflat Classic or
60° Blade
Main Tape
(reflective)
GXF-775
Oratape
60° Blade
HT55
MEDIA
CARRIER
MEDIA
CARRIER
www.uscutter.com
425.481.3555
Digital Printed
Graphics
Indoor Wall
Vinyl
Heat Press
Outdoor
Signage
Stencils &
Masks
60
MEDIA
CARRIER
MEDIA
CARRIER