Time And Date Settings - Dranetz HDPQ Xplorer User Manual

Time and Date Settings

You have the option to set the exact time and date, as well as select the format of how
Time and Date
display
time and date will appear on screen. You can also set the instrument to automatically
adjust for daylight saving time (DST) changes. Set the time zone applicable to your
application using the Time Zone drop down selection list.
NOTE: Time and/or date cannot be changed if monitoring is on.
Action...
STEP 1: From the Instrument
Settings menu, press Set Time
and Date.
• Press Set Time to change the
• Press Time Format to select
• Press Set Date to change the
• Press Date Format to select
• Press Time Sync to set time
• Press Accept to save any
• Press Cancel to return to the
Shop for Data Logging products online at:
time settings. Proceed to Step
2.
the format to display time on
screen. Toggles between two
time format selections (as
screens show):
• digital using 1 to 12 hr
format (AM/PM)
• digital using 1 to 24 hr
format
date settings. Proceed to Step 3.
the format to display date on
screen. Toggles between the
following date format:
• mm-dd-yy
• dd-mm-yy
synchronization preferences
and related information.
Proceed to Step 4.
changes made and return to the
Instrument Settings menu.
Instrument Settings menu
without saving any changes.
DataLoggerStore
www.
CH 5/ Instrument Settings
Result...
12-hour Time Format
24-hour Time Format
HDPQ-502
HDPQ-502b
Continued on next page
5-3
1.877.766.5412
.ca