Advertisement
Table 5: Configuring Avaya Series 1000 Video Conferencing Endpoints
3
Enabling SIP protocol
Select Communications, click on SIP, and set the following parameters:
SIP Username : ext. This parameter is the same as step 1 of
●
video users
Authorization Name : Same as SIP Username
●
Authorization Password : Same as the Shared Communication Profile
●
Password used in step 2 of
SIP registarion : Through Proxy
●
SIP Proxy : Enabled
●
Proxy Hostname : Session Manager FQDN or IP address used for registration.
●
This is the Session Manager Security Module / SIP Entity IP address or
corresponding FQDN.
SIP Registrar : Enabled
●
Registrar Hostname : Same as Proxy Hostname
●
TCP Signalling : Enabled
●
4
Confirming Registrar Status
Select Communication, click SIP and confirm if:
Registrar Status: Registered
●
AVTS R 6.0 Quick Setup
Configuration of SIP video endpoints on Communication Manager 6.0
on page 10
Table 4: Adding video users
For feedback, use document@avaya.com
Table 4: Adding
on page 10
August 2010
13
Advertisement
