Make Noise CONTOUR Manual page 11

Patch Ideas (con't)

Typical Voltage Controlled Triangle Function (LFO)

Patch the EOC to the Gate Input. Set Onset and Decay Panel Controls to 12:00. Apply the desired modulation to both CV inputs.

Setting Onset and Decay parameters further clockwise lengthens the cycle. Setting these parameters further counter clockwise

shortens the cycle, up to audio rate. The shape of the resulting function may be varied from Linear to Exponential using the

Vari-Response panel control.

Typical Voltage Controlled Ramp Function (LFO)

As above, only the Onset Panel Control is set full counter clockwise while the Decay Panel Control is set to at least 12:00. Decay

parameter determines the rate.

Table of Contents