Yardworks 060-3808-8 Operator's Manual page 8

8
model no. 060-3808-8 | contact us: 1-866-523-5218
• Do not attempt to remove cut material nor hold material to be cut when the motor is
running or when the cutting blade is moving.
• Always keep your right hand on the rear handle and your left hand on the front handle
when the blade is rotating.
• Always be aware of the power cord' s location and keep clear of the area you are working
in. Cords may become a trip hazard to the operator. Cords that are in the cutting path may
be cut by the edger.
• Never stand or have any part of your body in line with the path of the edger blade.
• A coasting blade can cause injury while it continues to spin after the motor is stopped or
throttle trigger released. Maintain proper control until the blade has completely stopped
rotating.
• Do not leave the product unattended.
• If the power supply cord is damaged, it must be replaced only by the manufacturer or by
an authorized service center to avoid risks of injury.
• Save these instructions. Refer to them frequently and use them to instruct others who
may use this tool. If you loan someone this tool, loan them these instructions and make
sure they read and understand them before they use the tool in order to prevent the
misuse of the product and possible injuries.
! DANGER – ROTATING BLADE:
• Keep both hands on the handles when the blade is rotating.
• Keep hands and feet away from the cutting area.
• Do not attempt to remove cut material nor hold material to be cut
when the motor is running or when blade is moving.
• Make sure the unit is unplugged when clearing jammed material
from blade.
• Keep guards in place.
• Keep blade clean and sharp. Replace dull blades as needed.
CAUTION: The blade continues to rotate for a few seconds
!
after the unit is turned off.
SAVE THESE INSTRUCTIONS FOR
FUTURE REFERENCE!