Yardworks 060-3808-8 Operator's Manual page 18

18
model no. 060-3808-8 | contact us: 1-866-523-5218
ADJUSTING THE DEPTH OF THE CUT
The front wheel can be adjusted to allow a deeper or shallower cut, and to increase the life of the
blade. Change the edging depth from the shipping position to your desired depth by:
1. Release the power switch. Wait for blade to come to a complete stop.
2. UNPLUG THE TOOL.
3. Loosen the adjusting knob and move the wheel up (to increase the depth) or down (to
decrease the depth).
4. After the adjustment is complete, tighten the adjusting knob securely.
TO DECREASE
BLADE
DEPTH
CURB
! WARNING: Thick overgrowth may drag on the guard. Reduce
the cut of the depth to a minimum to help reduce this effect.
TO INCREASE
DEPTH
DEPTH
ADJUSTING
BLADE
KNOB