Cisco SCE 1000 Quick Start Manual page 30

Study the examples that follow to understand the procedure for various topologies.
Enter the topology configuration menu.
Step 1
Would you like to enter the Topology configuration menu? [no]: y
Enter your password if prompted.
–
Type y and press Enter.
The topology configuration dialog begins.
Step 2 Specify the connection mode.
To define inline connection mode, press Enter.
–
To define receive-only connection mode, type 2 and press Enter.
–
Enter Connection mode:
1- inline
2- receive-only
Enter your choice [1]:
Specify the On-failure link behavior.
Step 3
To specify Bypass, press Enter.
–
To specify Cutoff, type
–
Enter On-failure behavior:
1- bypass
2- cutoff
Enter your choice [1]:
Specify the admin status of the SCE 1000 after abnormal boot.
Step 4
To specify Not-Operational status after abnormal boot, press Enter.
–
To specify Operational status after abnormal boot, type
–
Enter admin status of the SCe after abnormal boot:
1- Operational
2- Not-Operational
Enter your choice [1]:
Examples
The following examples present the procedure for configuring the topology-related parameters for various topologies. Refer the
Setup Command Parameters, page 14 for a summary of appropriate values for the parameters for each topology.
• Example 1:, page 30
• Example 2:, page 31
• Example 3:, page 31
Example 1:
Following is a sample topology configuration for a topology using an external switch.
All other parameter values are automatically assigned by the system as follows:
• Link bypass mode on-failure — Bypass
• Admin status of the SCE after abnormal boot — Operational
Would you like to enter the Topology configuration menu? [no]: y
Enter Connection mode:
1- inline
2- receive-only
Enter your choice [1]: 2
30
and press Enter.
2
and press Enter.
1