Table of Contents
Advertisement
Polycom RMX 4000 Hardware Guide
Connecting Cables on the RMX 4000
To connect the cables (AC and DC systems):
•
RTM-IP 4000:
— Connect the Management Network cable to LAN 2.
— Connect the Signalling cable to LAN 3.
— Connect the Shelf Management cable to LAN 6.
•
For each installed RTM LAN - Connect the LAN cable to LAN 2.
•
For each installed RTM ISDN:
— Connect the E1/T1 cables to their PRI Ports.
— Connect the LAN cable to LAN 1.
LAN Connections to RTM LAN
Signalling
Network
Management
Network
Off/On
switch
Figure 1-6
RMX 4000 Rear Panel View with AC Power and Communication
Cables
•
LAN 4, LAN 5 and the Serial ports are only for debugging and not for
customer use.
•
Do not remove the protective plastic caps from LAN 1, LAN 4 and LAN 5
ports.
E1/T1 Connection to RTM ISDN
Power Cables
Shelf
Manage-
ment
1-19
Advertisement
Table of Contents
