CHAPTER 2
IMPORTANT INFORMATION
Important information
WARNING
Failure to follow the installation instructions shipped with your SMART product could result in
l
personal injury and product damage which may not be covered by the warranty.
Do not open or disassemble the SMART product. You risk electrical shock from the high
l
voltage inside the casing. Opening the casing also voids the warranty.
Do not stand (or allow children to stand) on a chair to touch the surface of your SMART
l
product. Rather, mount the product at the appropriate height.
Do not climb (or allow children to climb) on a wall- or stand-supported SMART product.
l
Climbing on the SMART product could result in personal injury or product damage.
Individuals under the age of 18 require adult supervision when using this SMART Product.
l
To reduce the risk of fire or electric shock, do not expose the SMART product to rain or
l
moisture.
If your SMART product requires replacement parts, make sure the service technician uses
l
replacement parts specified by SMART Technologies or parts with the same characteristics
as the original.
Ensure that any cables extending across the floor to your SMART product are properly
l
bundled and marked to avoid a trip hazard.
Do not insert objects inside the cabinet ventilation holes, because they could touch
l
dangerous voltage points and cause electric shock, fire or product damage which may not
be covered by the warranty.
Do not place any heavy objects on the power cable. Damage to the cable could cause
l
shock, fire or product damage which may not be covered by the warranty.
Use only extension cords and outlets that can fully accommodate the plug.
l
Use the power cable provided with this product. If a power cable is not supplied with this
l
product, contact your supplier. Use only power cables that match the AC voltage of the
power outlet and that comply with your country's safety standards.
If the glass is broken, do not touch the liquid crystal. To prevent injury, handle glass
l
fragments with care when disposing of them.
Do not move or mount the display by connecting rope or wire to its handles. The display is
l
heavy, and failure of the rope, wire or handle could lead to injury.
i
smarttech.com/kb/171178
Need help?
Do you have a question about the SMART Board 2000 series and is the answer not in the manual?