Bolt P12 User Manual page 17

Problem
The high-voltage indicator blinks three times
per second.
The high-voltage indicator blinks four times
per second.
Only one of the battery indicators is
illuminated, and it's blinking.
Solution
Surge protection has been activated. This can be caused
by flash malfunction. Turn off your flash, and restart it. If
the problem persists, take your flash to a certified
service center.
This indicates that the batteries are low, and that the
P12 is taking too long to recycle the flash. Replace the
batteries in the P12.
There is less than 20% battery power remaining. Replace
the batteries in the P12.
|
Troubleshooting 17